01803 295430
sales@spwales.com
by: Trumeter
Product Code: PITRPW
Availability: Enquire Below
The Power meter from Trumeter is much more than a simple ammeter. Not only can it be used for both single and three phase supplies, but it can be used to measure multiple parameters, including Current, Voltage, Active & Reactive Power, Apparent Power, Frequency & Power Factor. It works with both current and potential transformers and includes Modbus RTU communication, plus two independent opto-isolated digital outputs plus one analog 4-20mA output. Configurable through easy-to-use software connected via USB, the meter can have up to 10 alarm setpoints and the backlighting, coupled with the alarm set-points enable the end-user operator to be alerted when one of the measured parameters is out or range.
This meter can be pre-wired into an enclosure for easy installation on site. Please contact our friendly sales team on 01803 295430 or email sales@spwales.com for more information.
For examples of our pre-wired enclosures, please view our Metering Kits page.
| Meter Type | Three Phase | ||
| Fitting Type | Panel Mount | ||
| Max Current (amps) | 5A | ||
| Smart | No | ||
| Input Type | Current Transformer | ||
| Nominal Input | 100 - 277 VAC | ||
| Backlight colours | Red, Green, White | ||
| Accuracy | 1% | ||
| Availability | Next Day | ||
| MEASURED PARAMETERS | |||
| Active Energy (kWh) | Line Power Factor (PF) | ||
| Active Power (W) * | Line Reactive Power (kVAr) * | ||
| Apparent Energy (kVAh) * | Line to Line Voltage (V) | ||
| Apparent Power (VA) * | Line to Neutral Voltage (V) * | ||
| Average Current (I) | Maximum Current (I) * | ||
| Average Power Demands (W) | Maximum Power Demands (W) * | ||
| Average Voltage (V) | Maximum Voltage (V) * | ||
| Current (I) | Power Factor (PF) * | ||
| Current in Neutral (I) | Reactive Energy (kVArh) * | ||
| Frequency (Hz) * | Reactive Power (VAr) * | ||
| Hours Run (hr) | Total Harmonic Distortion (Amps) | ||
| Line Active Power (W) * | Total Harmonic Distortion (Volts) | ||
| Line Apparent Power (kVA) | Voltage (V) | ||
| Line Current (I) * | |||
| Meter Type | Three Phase | ||
| Fitting Type | Panel Mount | ||
| Max Current (amps) | 5A | ||
| Smart | No | ||
| Input Type | Current Transformer | ||
| Nominal Input | 100 - 277 VAC | ||
| Backlight colours | Red, Green, White | ||
| Accuracy | 1% | ||
| Availability | Next Day | ||
| MEASURED PARAMETERS | |||
| Active Energy (kWh) | Line Power Factor (PF) | ||
| Active Power (W) * | Line Reactive Power (kVAr) * | ||
| Apparent Energy (kVAh) * | Line to Line Voltage (V) | ||
| Apparent Power (VA) * | Line to Neutral Voltage (V) * | ||
| Average Current (I) | Maximum Current (I) * | ||
| Average Power Demands (W) | Maximum Power Demands (W) * | ||
| Average Voltage (V) | Maximum Voltage (V) * | ||
| Current (I) | Power Factor (PF) * | ||
| Current in Neutral (I) | Reactive Energy (kVArh) * | ||
| Frequency (Hz) * | Reactive Power (VAr) * | ||
| Hours Run (hr) | Total Harmonic Distortion (Amps) | ||
| Line Active Power (W) * | Total Harmonic Distortion (Volts) | ||
| Line Apparent Power (kVA) | Voltage (V) | ||
| Line Current (I) * | |||
Planning a large project or looking to become a regular customer?
Let us know the product or products you require along with quantities, and we'll get in touch with our best price.
